Whirlpool EV15OCXK - Manual (Page 3)

Using your freezer
Setting the Cold Control...
To start, turn control to the middle of the dial.
This setting will maintain zero zone temperatures
under normal operating conditions.
POWER SAVING CONTROL
SAVES A g- |.-| ^ iEDUCES ,
POWER ^ W EXTERIOR
O f f O n MOISTURE
Adjusting Cold Control...
• Turn control to higher number for colder
temperatures.
• Turn to lower number for less cold temperatures.
Cooling Freezer First...
• Allow freezer to cool 6 to 8 hours before filling
with frozen food.
• Let it cool overnight before adding large
amoun s of unfrozen food.
• Frost WIN form on the shelves. It will form first and
be hea vier on the top shelves.
Note: When freezer is first started the compressor
will run constantly until the cabinet is cooled. It
may take up to 6 to 8 hours or longer, depending
on room temperature and the number of times
the freezer door is opened.
Afterthe cabinet is cooled the compressor will
turn on and off as needed to keep freezer at
proper temperature.
The Power Saving Control...
operates electric heaters. These heaters help
prevent moisture from forming on the outside of
the freezer when humidity is high
• Use the OFF setting when humidity is low to save
electricity.
• Use O' n I only if moisture forms on outside of
freezer
The Key Eject Lock...
can help reduce the hazard of child
entrapment.
To lock or unlock the freezer you must hold the
key in the lock while turning. The lock is spring
loaded so the key cannot be left in the lock.
If the key is lost, contact your WFIIRLFOOL dealer
for a replacement. Always give the complete
model and serial number of your freezer when
requesting a replacement key.
Bottom Trivet...
To remove;
• Lift up, then pull out.
To replace:
• Set in bottom of freezer.
• Push into place.
Lift up
Then out
J