Using your refrigerator, Setting the controls, Changing the control settings – Whirlpool ED19CK User Manual
Page 5: Power saving control, Setting the controls changing the control settings
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using your refrigerator
Temperature Control
Air Control
Setting the controls...
The Temperature Control is in the refrigerator and
the Air Control is in the freezer section. When the
refrigerator is plugged in for the first time..
1. Set the TEMPERA
TURE CONTROL to 3.
2. Set the AIR CON
TROL to 3.
Changing the control settings...
If you need to adjust temperatures in the refriger
ator or freezer, use the settings listed in the chart
below.
Give the refrigerator time to cooi down com-
pieteiy before adding food. (This may take sev
eral hours,]
These settings should be about right for
normai househoid refrigerator usage.
The controls will be set about right when milk or
juice is as cold as you like and when ice cream
is firm.
Do not biock the air outiet on the control panel.
Blocking it can slow the air movement needed to
keep temperatures at the level you set.
• Adjust the Temperature Control first,
• Wait at least 24 hours between adjustments.
• Then adjust the Air Control, if needed.
QUESTIONS?
...call your
COOL-LINE®
service
assistance
telephone
number
(page 15).
CONDITION:
REASONS:
RECOMMENDED SETTINGS:
If Refrigerator
Door opened often
Temperature Control
4
Section is
TOO WARM
Large amount of food added
Room temperature too warm
Air Control
3
If Freezer
Door opened often
Temperature Control
3
Section is
TOO WARM
Large amount of food added
Very cold room temperature
(can't cycle often enough)
Air Control
4
If Refrigerator
Controls not set correctly
Temperature Control
2
Section is
TOO COLD
for your conditions
Air Control
3
If ICE isn't
Heavy ice usage
Temperature Control
3
MADE FAST ENOUGH
Very cold room temperature
[can't cycle often enough)
Air Control
4
If BOTH SECTIONS
Door opened often
Temperature Control
3
are TOO WARM
Large amount of food added
Very warm or very cold
room temperatures
Air Control
2
Power Saving Control...
The Power Saving Controi on the Control Con
sole operates electric heaters around the door
openings. These heaters help keep moisture from
forming on the outside of the refrigerator.
OFF
Use the "OFF" set
ting when humidity
is low.
ON
2. Use the "ON" setting
if moisture forms
on the outside of the
refrigerator.