Whirlpool ED19CK - Manual (Page 6)

Adjusting meat pan temperature...
Cold air flows against the
meat pan through an opening
between the freezer and the
refrigerator. This heips keep the
meat pan coider than the rest
of the refrigerator.
Set the control to let more or
less cold air through.
Use Control to Adjust
Meat Pan Temperatures
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you
use your refrigerator. If your model has glass shelves,
be careful. They are heavy.
To remove shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace:
1, Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
Removing freezer shelves...
1, Lift front slightly,
2, Lift back off supports.
3, Replace in reverse order.
Lift the Front
Then the Back
Removing the crisper, meat pan and covers...
Removing:
1. Slide crisper and meat pan straight out to stop
2, Lift the front,
3. Slide the rest of the way out.
4, Replace in reverse order.
Replacing:
• Covers are held in place by two pegs at the back
and two notched tabs in front.
1. Press front tabs out of the way.
2, Lift cover front.
3. Lift back off the pegs.
4, Replace m reverse order.
Removing freezer bin...
For proper air movement, keep the freezer bin in
place when the refrigerator is operating.
Push the Tab |
to Clear the Cover.
Snap Back Info Place.
To remove the bin:
• Slide out to the stop.
• Lift the front to clear the stop.
• Slide out the rest of the way.
To replace the bln:
• Place bin on the slides,
• Make sure the stops clear
the front of the slides.
• Slide bin in.