Operating your washer, Starting your washer, Close the washer lid – Whirlpool 3363562 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating Your Washer
To obtain the best washing results, you must operate your washer properly. This section
gives you this important information. Page references are included for more information.
Starting your washer
1. Add measured detergent to the
washer. Then place a sorted load of
clothes in the washer.
• Sort and load clothes as described on
pages 13-14.
• If desired, you may also add color safe
bleach to the wash load.
2. Close the washer lid.
3. Turn the Load Size Selector to the
setting that corresponds with the size
of your wash load and the type of
fabric being washed.
• Depending on your model, your washer
has either two (Small, Large) or three
(Small, Medium, Large) load size
settings.
• To change the load size setting after the
washer has started to fill, turn the
Selector to the desired new setting.
4. Select a wash-rinse temperature with
the Water Temperature Selector. Match
the water temperature with the type of
fabric and soils being washed.
• See page 15 for water temperature
guidelines.
• Three wash-rinse temperatures are
available: hot-cold, warm-cold, and
cold-cold.