Understanding what happens in each cycle, Wash, Notes – Whirlpool 3363562 User Manual
Page 9: Rinse
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R W A S H E R
Understanding what happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to
the selected load size) before agitation and
timing start. The washer begins agitating
immediately after filling; agitation occurs with
the washer lid up or down.
After agitation starts, the Cycle Control
Knob turns clockwise until it points to an
OFF area and the cycle ends.
WASH
NOTES:
• The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
• A Gentle Wash system helps protect your
fabrics by reducing wash agitation speed
during the last few minutes of wash
agitation in the Normal and Permanent
Press cycles.
RINSE
Fill
Fill
Wash selected time
Rinse
Drain*
No agitation
Drain-No agitation
‘The Permanent Press cycle partially
drains, fills, agitates briefly, and drains.
Spin