Whirlpool EB19ZK - Manual (Page 6)

Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough to
hold bottles, milk and other heavy food items.
. Glass shelves are
heavy. Be careful.
To remove glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
Removing the freezer basket...
For proper air movement, keep the freezer basket
in place when the refrigerator is operating.
To remove the basket:
• Slide out to the stop.
• Lift the front to clear the stop.
• Slide out the rest of the way.
To replace the basket:
• Place basket on the slides.
• Make sure the wire stops
clear the front of the slides.
• Slide basket in.
Removing the crispers and crisper covers...
Removing crispers:
1. Slide crispers straight out to stop.
2. Lift the front. „ ...
3. Slide the rest of the way out. to ciear
4. Replace in reverse order.
Cover.
Removing covers:
Covers are held in by two pegs at the back and two
notched tabs in front.
1. Press front out of way.
2. Lift cover front.
3. Lift back out of pegs.
4. Replace in reverse order.
Snap Back
into Place.
If necessary, the center leg can be made shorter or
longer to help level the crisper covers. Turn the leg
clockwise to make it longer.Turn the leg counterclock­
wise to shorten it.