Moving the meat pan, Changing the light hulh, Ice cube trays – Whirlpool EB19ZK User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Moving the meat pan...
The meat pan can be taken out and moved the
same way as the shelves, Remove the meat pan first.
Removing:
1. Slide the meat pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. Tilt cover up at front,
5. Lift up at back.
6. Pull straight out.
Replacing:
1. Guide the rear hooks into the slots In the shelf
supports.
2. Tilt up front of cover until rear hooks drop into slots.
Lower front of cover to level position.
3. Replace meat pan in reverse order.
Changing the light hulh...
WARNING: Before removing the light shield for
cleaning or for replacing the bulb,
either unplug refrigerator or discon
nect
electricity
leading
to
re
frigerator at the main power supply.
Shock and injury can occur if elec
tricity remains connected.
Push in the Center;
Pull Down
1. Push lightly on the top center of the light shield until
the notched tab unhooks from the control panel.
2. Pull down on the shield until the tab clears the con
trol panel.
3. Lift the back hooks out of their slots,
4. Replace with a 40-watt appliance bulb.
5. Replace light shield in reverse order
2. Pull grille outwards as shown,
3. Do not remove Tech sheet fastened behind grille.
Metal Clips
Support Tabs
To replace:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close the doors,
Ice cube trays...
If cubes are not used, they may shrink. The moving
cold air starts a slow evaporation. The longer cubes
are stored, the smaller they get.
To remove Ice:
1. Hold tray at both ends,
2, Slightly twist.