End of cycle signal – Whirlpool 3396311 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
O P E R A T I N G Y O U R D R Y E R
End of cycle signal
(on some models)
The dryer sounds a signal to let you know when
the cycle is finished. The signal is helpful when
you are drying permanent press, synthetics, and
other items that should be taken out as soon as
the dryer stops.
The signal is not adjustable but can be turned
off (on some models). If your model has an End
of Cycle Signal selector:
• Turn the Start Button (End of Cycle Signal
Selector) to ON if you desire a signal; turn to
OFF if you do not desire a signal.
10
Advertising