Whirlpool 3396311 - Manual (Page 6)

O P E R A T I N G Y O U R D R Y E R
Operating Your Dryer
In This Section
Page Page
Before starting your dryer............. .................. 6 Understanding y< >ur cycles........ ................. 7
Starting your dryer......................... ................... 6 Selecting the rigi it cycle............... ................. 9
Stopping your dryer....................... .................. 6 End of cycle sign al........................ ............... 10
Restarting your dryer..................... .................. 6
The information in this section helps you learn to use your dryer evidently and safely. Refer to
“Laundry Tips” on page 15 for additional control setting, sorting, ard loading information.
Before starting your dryer
Wipe the dryer drum with a damp cloth before If your dryer has a Consumer Buy Guide,
using to remove dust from storing and remove it and place it with your Use and Care
shipping. Guide.
Starting your dryer
1. Load clothes into the dryer and close the
door.
2. Turn the Cycle Control Knob either way to
the desired setting. (If your dryer has a
Temperature Selector, set the selector to
the desired setting.)
3. Push the Start Button.
NOTE: Your dryer stops automatically when a
cycle ends.
Stopping your dryer
You can stop your dryer any time during a cycle.
Open the dryer door or turn the Cycle Control
Knob to OFF.
NOTE: The Cycle Control Knob should point to
an OFF area when the dryer is not in use. If you
want to stop the dryer before the cycle is
finished, turn the Cycle Control Knob to an OFF
area.
Push to start
Restarting your dryer
1. Close the door.
2. Select a new cycle and temperature (if
necessary).
3. Press the Start Button.
Push to start