Maintenance-as needed, Cleaning a clogged lint screen, Cleaning the dryer interior – Whirlpool 3396311 User Manual

Page 12: Electrical shock, Cleaning the dryer exterior, Cleaning the dryer interior ^warning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

C A R I N G F O R Y O U R D R Y E R

Maintenance-as needed

Use the following suggestions about cieaning
and lint removal to maintain your dryer and
keep it operating efficientiy.

Cleaning a clogged lint screen

Laundry detergents and fabric softeners can
cause a residue build-up on the lint screen. A
clogged lint screen can extend drying times.
Clean the lint screen every six months or more
frequently if it becomes clogged due to a
residue build-up. Use the following method:
1. Wet both sides of lint screen with hot water.
2. Wet a nylon brush with hot water and liquid

detergent.

3. Scrub lint screen with the brush until all

residue buiid-up is removed.

4. Rinse with hot water.
5. Thoroughly dry lint screen with a clean

towel and replace in dryer.

Cleaning the dryer interior

^WARNING

Electrical Shock,

Personal Injury and Fire Hazard

• Turn off the electrical power before

cleaning the interior.

• Make sure the dryer is cool.
• Use nonflammable cleaner.

Failure to do so could result in electrical

shock or injury, fire or explosion.

Garments which contain unstable dyes, such
as denim blue jeans or brightly colored cotton

items, may discolor the dryer interior. If you

want to remove stains from dryer drum, use
powdered laundry detergent.
1. Make a paste with detergent and very warm

water.

2. Apply paste to a soft cloth and scrub area

until all excess dye is removed.

3. Wipe thoroughly with a damp cloth.
4. Tumble a load of rags to dry.

Cleaning the dryer exterior

Wipe with a soft, damp cloth.

12

Advertising