To delay the start using stop time, Additional self-cleaning information – Whirlpool FGS395Y User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

U S I N G T H E S E L F - C L E A N I N G C Y C L E

When the controls are set and the door is locked,
the Self-Cleaning cycle will begin. CLEAN will
appear on the display.

To delay the start using Stop
Time:

1. Follow Steps 1 through 3 under ‘To start

cleaning immediately.”

2. Push the Stop Time button.

3. Turn Time/Temp Set Knob until the time you

want cleaning to stop appears in the display.

DELAY and CLN STOP TIME will show in the
display.

When the Self-Cleaning cycle begins,

DELAY and STOP will go off and ON will
appear in the display.

C ' D ^ i

CLN STOP TIME

Additional Self-Cleaning

information:

1. Changes can be made at anytime by pres­

sing the Cancel button. Push the Clean
button and turn theTime/Temp Set Knob to

the new desired clean and stop time.

2. When the oven temperature goes above

normal broiling temperatures, the oven door

cannot be opened. The door cannot be
opened until the oven temperature goes
below normal broiling temperatures, approxi­

mately 1 hour after the cycle is completed.
Never force the door Lock Lever.

The time of day will show in the display

and LOCKED will remain lit until the oven has
cooled to a normal broiling temperature and

the oven door Lock Lever can be moved to
the left.

3. After the Self-Cleaning cycle is completed,

the display will show the time of day.

I

25

Advertising