Winterizing – Whirlpool LA3800XS User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Service or performance problems caused by the use of any product
not manufactured by Whirlpool Corporation are the responsibility of
the manufacturer of that product.
^winterizing
Because some water stays in the washer, freezing
can cause a lot of damage. If your washer is
stored or moved during the cold weather...
1. Shut off both water
faucets. Disconnect
and drain water
inlet hoses.
2. Puta quart of
automotive-type
antifreeze in the
basket.
Set the washer for a
DRAIN and SPIN (see
page 8). Let it run
for about 30 seconds
to mix the antifreeze
and water.
To use the washer again...
1. Flush water pipes and hoses.
2. Connect hoses to the washer
3. Turn on the water faucets.
4. Run the washer
through a com
plete cycle with
one cup of deter
gent to clean out
the antifreeze.
10