Starting your washer, Select cycle and wash time; start the washer – Whirlpool LA3800XS User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting
your washer:
1. Measure and add detergent.
2. Place sorted load in washer.
3. Start the washer.
Select CYCLE and WASH TIME;
Start the washer
Fill Area
A.
Push In the Control Knob and
turn It to the right. It must be
pushed in and turned only
clockwise.
B.
Stop on a number in the cycle you
want. The numbers are the minutes
of wash time. The drawing shows
6 minutes of agitation in the REG
ULAR NORMAL Cycle. NOTE: The
washer will fill only when the knob
points to a FILL area.
C.
Start the washer by pulling out
the Control Knob. After filling, the
washer will agitate for the
selected number of minutes.
D.
To stop the washer at any time,
push In the Control Knob. To
restart the washer, pull out the
Control Knob.