Wash temperature – Whirlpool LA3800XS User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. WASH TEMPERATURE
нот WATER
can be selected by
turning the Control Knob to 12 or
14 minutes in the REGULAR HEAVY
Cycle.
All rinses use cold water. This saves
energy and helps prevent wrinkles
trom setting Into place.
WARM WATER
can be selected by
turning the Control Knob to 8 or 10
minutes in the REGULAR HEAVY Cycle.
• A warm wash is preset in the SHORT
Cycle. Just turn the Control Knob to
the 6 minute setting in that cycle.
_ To select a
3. WATER LEVEL
NORMAL 6 ШШ
ppy
HIGH WATCR LEVEL.
The washer will
automatically fill to its highest level,
(about 21.7 gals./82.1 L), when the
Control Knob points to a FILL area.
NOTE: The washer will fill only when
the Control Knob points to a FILL area.
LOWER WATER LEVELS.
Setting the
washer to fili with iess water aiso sets
it for a shorter wash time.
1. Push the Control Knob in and turn
it clockwise to a FILL area in the
cycle you want.
2. Pull the Control Knob out; the
washer will start to fill.
3. When the washer reaches the
desired water level, push In the
Control Knob and slowly turn it
past the FILL area. Pull out the
Control Knob to start the washer.
For all rinses, the washer fllls to Its
highest level with cold water.