E. install freezer, Parts and features, Model rv12efr – Whirlpool RV15EFR User Manual

Page 3: Model rv15efr

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

E. Install freezer

Level freezer so the door will stay open
at any position.

Parts And Features

Model RV12EFR

Model and
serial number

label

(on side wall)

Temperature
control

1. Locate, remove and discard the 4

bolts that held the freezer in the

shipping crate.

2. Locate the 2 front leveling legs

among the packing materials.

3. Screw these legs into the front

holes on the bottom of the freezer.
The back of the freezer rests on 2
fixed supports.

4. Adjust the 2 front legs so freezer

does not rock.

5. Connect freezer to proper electrical

supply and attach retaining clip.
(Refer to “D. Locate proper
electrical supply" on page 2.)

6. Slide freezer into place.
7. Place a level on top of the freezer -

first side to side then front to back.
Turn leg clockwise to raise a

corner. Turn leg counter-clockwise
to lower a corner.

8. Repeat step 7 until the freezer is

level.

9. After freezer is fully loaded,

recheck with level.

Refrigerated
stationary
shelves

Lower

storage
gate

Base grille

Leveling

legs

Stationary

door

shelves

(not shown)

Model RV15EFR

Model and

serial number
label

(on side wall)

Temperature

control

Stationary

door

shelves

Key eject

lock

Refrigerated

stationary
shelves

Lower

storage
gate

Base grille

Leveling

legs —

(not shown)

Page 3

Advertising
This manual is related to the following products: