Selecting a cycle and time, Regular cycle, Permanent press cycle – Whirlpool 3366860 User Manual

Page 7: Fabricare cycle, Soak cycle

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

O P E R A T I N G Y O U R W A S H E R

Selecting a cycle and time

Your washer's Cycle Control Knob is shown
below. Use the information in this section to
help you make the best cycle selections for
your wash loads. Each cycle is designed for
different types of fabrics and soil levels.

• The washer pauses briefly throughout

each cycle. These pauses are rK>rmal for
washer operation.

• Refer to page 8 to help you understand

what happens during a wash cycle.

off

8 6 PERMANENT PRESS

NORMAL SOIL 6 2

HEAVY SOIL 14

W

FABRICARE

SOAK 20 OFF

Regular cycle

The Regular cycle features longer spins to
shorten drying time.

• Use HEAVY SOIL 10 to 14 minutes of

wash time to clean large loads of sturdily
constructed fabrics that are heavily soiled.

• Use NORMAL SOIL, 6 minutes of wash

time, to clean sturdily constructed fabrics
that are lightly to moderately soiled.

Permanent Press cycle

The Permanent Press cycle features a cool­
down rinse and shorter spins to reduce

wrinkling.

• Use 8 minutes of wash time to clean

permanent press and some synthetic
fabrics that are moderately soiled.

• Use 6 minutes of wash time to clean

permanent press and some synthetic

fabrics that are lightly soiled.

Fabricare cycle

The Fabricare cycle features a brief wash
cycle and shorter spins for gentle soil
removal.

• Use 3 to 6 minutes of wash time to clean

delicate items and washable knits that are
lightly to moderately soiled.

Soak cycle

The Soak cycle features brief periods of
agitation and soak time to help renK)ve
heavy soils and stains that need pretreat­
ment.
• Use up to 20 minutes of soak time, de­

pending on soil level.

• Use warm water when soaking laundry.

(Hot water can set stains.) See pages 15­
17 for stain removal information.

• Use the amount of detergent or presoak

additive recommended by the manufac­
turer.

• After the Soak cycle ends, add detergent

and set a new wash cycle.

Advertising