Using the liquid chlorine bleach dispenser, Self-cleaning lint filter – Whirlpool 3366860 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

O P E R A T I N G Y O U R W A S H E R

Using the liquid chlorine bleach dispenser

Always measure liquid chlorine bleach. Do

not guess. Never use more than 1 cup
(250 mL) for a full load. Use less with lower

water level settings. Follow manufacturer’s
directions for safe use. Use a cup with a
pouring spout to avoid spilling.

1. Load the washer.

2. Pour measured chlorine bleach carefully

into the dispenser. Do not let bleach
splash, drip, or run down into washer
basket. Undiluted bleach will damage any
fabric it touches.

3. Start the washer. Bleach will be diluted

automatically during wash part of cycle.

NOTE: Do not use this dispenser to add
powdered chlorine or all-fabric bleach to

your wash load. The dispenser is for liquid
chlorine bleach use only.

Self-cleaning lint filter

The lint filter at the bottom of the washer
basket cleans itself. During agitation, wash
and rinse water passes over the filter,
separating the lint from the water. The lint is
then spun away from the filter and out of the
system during the spin part of the cycle.

If your washer drains into a tub, remove

any lint collected in the tub or strainer.

SeH-cleaning
lint filter

Basket
interior

Advertising