Whirlpool AD0402XM0 - Manual (Page 3)

Before you use your dehumidifier
It Is your personal responsibility and obliga­
tion to make sure your dehumiditier:
• Has been properly installed on a floorthat is rea­
sonably level.
• Is the right size for the area you want to dehu-
midify.
• Is connected to the right kind of outlet with the
proper electrical supply and grounding. (Refer
to your "Electrical Requirements.")
• Is used only for jobs expected of home dehu­
midifiers.
• Is not used by children or anyone not able to
operate it properly.
• Is properly maintained.
• Is used in an area where the room temperature
will not fall below 65°F (18.3°C). [48 Pint Model will
operate in temperatures down to 50°F (10°C).]
• Do not remove tech sheet which is inside the
cabinet. Your service technician needs this infor­
mation.
Install Properly...
1. On most models, two rollers let you easily move
the dehumidifier. Remove the water pan. Tilt unit
forward and roll to another position.
If your model does not have rollers, pick up the
unit to move it to another position.
2. Allow at least 12 Inches (30.5 cm) of space
around the unit for good air circulation.
3. Keep all outside doors, windows and other
openings closed when dehumidifier is operat­
ing. Humid outdoor air will add to the dehu­
midifier’s operating load.
4. Water pan must be properly positioned, on the
hangers inside the cabinet, when dehumidifier
is operating.