Whirlpool EBI9MK - Manual (Page 6)

Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items.
GLASS SHELVES ARE
HEAVY. BE CAREFUL.
To remove glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace glass shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into siot.
Lower tront of shelf to level position.
Removing freezer shelf...
1. Lift tront slightly.
2. Lift back off supports.
3. Replace in reverse order.
LIFT THE FRONT
THEN THE BACK
Removing the freezer basket...
For proper air movement, keep the freezer basket
in place when the refrigerator is operating.
To remove the basket:
1. Slide out to the stop.
2. Lift the front to clear the stop.
3. Slide out the rest of the way.
To replace the basket:
1. Place basket on the slides.
2. Make sure the wire stops clear the front of the
slides.
3. Slide basket in.
Removing the crispers and crisper
covers...
To remove the crispéis:
1. Slide crisper straight out to stop.
2. Lift the front.
3. Slide the rest of the way out.
4.
Replace in reverse order. t © clear
To remove the cover: cover .
Covers are held in place by two pegs at the back
and two notched tabs in front.
1. Press front out of way.
2. Lift cover front.
3. Lift back out of pegs.
4.
Replace in reverse order.
SNAP BACK
INTO PLACE.
COVER SUPPORT
If necessary, the center leg can be made shorter
or longer to help level the crisper covers. Turn the
leg clockwise to make it longer. Turn the leg coun­
terclockwise to shorten it.