Whirlpool EBI9MK - Manual (Page 7)

Moving the meat pan...
The meat pan can be taken out and moved the
same way as the shelves. Remove the meat pan
first.
To remove the meat pan and cover:
1. Slide the meat pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4.
Tilt cover up at front.
5. Lift up at back.
6.
Pull straight out.
To replace ttie meat pan and cover:
1. Guide the rear hooks of cover into the slots in the
shelf supports.
2. Tilt up front of cover until rear hooks drop into
slots. Lower front of cover to level position.
3. Replace meat pan in reverse order of removal.
Changing the light bulb...
O
Changing the light bulb...
WARNING: Before removing the light shield for cleaning or for replacing the bulb, either
unplug refrigerator or disconnect electricity leading to refrigerator at the main power
supply. Shock and injury can occur if elecfricify remains connecfed.
1. Push lightly on the top center of the light shield
until the notched tab unhooks from the control
panel.
2. Pull down on the shield until the tab clears the
control panel.
3. Lift the back hooks out of their slots.
4.
Replace with a 40-watt appliance bulb.
5. Replace light shield in reverse order.
Removing the base grille..
To remove the grille:
1. Open the doors.
2. Pull grille outwards as shown.
3. Do not remove Tech sheet
fastened behind
grille.
Ice cube trays...
If cubes are not used, they may shrink. The mov­
ing cold air starts a slow evaporation. The longer
cubes are stored, the smaller they get.
METAL CLIPS
SUPPORT TABS
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close the doors.
To remove Ice:
1. Hold tray at both ends.
2. Slightly twist.
7