Operating dehumidifier, Empty/adjust bucket light: dryness control – Whirlpool 1182182 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating dehumidifier
EMPTY/ADJUST BUCKET light:
DRYNESS CONTROL:
If this light is on, the dehumidifier is
not running.This light indicates that
you need to check:
• If the bucket is full, empty bucket
and replace.
• If the bucket is not in position,
remove bucket and replace. Make
sure the bucket fits all the way into
the dehumidifier and the light is off,
or dehumidifier will not run.
This controls the amount of moisture in
the room.Turn the control knob
clockwise for more drying.Turn the
control knob counterclockwise for less
drying.Turn control knob to "NORMAL"
to maintain average humidity
conditions.
NOTE: For the first few days of use, turn
the Dryness Control clockwise to
"DRYEST"to remove extra moisture
Some models: this controls fan
operation. Use desired setting.
HIGH - for faster moisture removal.
LOW - for slower moisture removal.