Removing the freezer shelves, Removing the freezer door shelves (edzzzr), Adjusting the shelf glides (edzopk) – Whirlpool 8EDZOZK User Manual
Page 10: Removing the freezer door shelves, A<^usting the shelf glides, Adjusting the shelf glides
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the freezer shelves
To remove the shelves:
1. Lift right side of shelf off supports.
2. Slide shelf out of shelf support holes.
3. Replace in reverse order.
To adjust the shelves:
1. Remove shelf as above.
2. Remove supports by sliding upward.
3. Replace supports on desired level.
4. Replace shelf.
NOTE:
The cup-shaped supports go in the back
of the freezer.
Removing the freezer door shelves
(
edzzzr
)
Shelves can be removed for easier cleaning.
To remove door shelves:
1. Grasp shelf at both ends.
2. Lift shelf up and pull out.
To replace door shelves:
1. Insert hooks into guides on both sides of door.
2. Push shelf down to lock into place.
Adjusting the shelf glides
(
edzopk
)
The shelf glides can be used to secure odd
shaped items or to separate other items.
1. Grasp glide.
2. Slide guide along track.
NOTE:
Shelf glides cannot be removed.
Slide along
track