Whirlpool 8EDZOZK - Manual (Page 11)

Removing the crisper and crisper cover
To remove the crisper:
1. Slide the crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Push glass insert up from bottom, then slide
out with both hands.
2. Lift front of cover frame.
3. Lift cover frame out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls
of refrigerator, then lower front into place.
2. Slide back of glass insert into place, then
lower front into place.
Pull out to the stop,
lift the front
and pull again.
Lift the cover
front, then
the back.
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide the meat drawer out to the stop.
2. Lift the front.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove crisper, crisper cover and meat
drawer.
2. Tilt front of cover up, lift at back and pull
straight out.
3. Replace in reverse order.
Adjusting the meat drawer temperature
Cold air flows against the meat drawer through
an opening between the freezer and the refrig­
erator. This helps keep the meat drawer colder
than the rest of the refrigerator for better storage
of meats.
Slide the control to let more or less cold air
through.
10