The surface burner grates, The removable cooktop, The surface burners – Whirlpool FGP210V User Manual

Page 7: Caring for your range, Warning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Caring For Your Range

^WARNING

Burn, Electrical Shock, Fire And

Explosion Hazard

Make sure all controls are OFF

and the range is cool before
cleaning.

Do not obstruct the flow of

combustion and ventilation air.

Failure to follow these guidelines
could result in burns, electrical
shock, fire or explosion.

The surface burner grates

1. Make sure all surface burners are

off and the surrounding parts are
cool,

2. Lift off the surface burner grates.
3. Wash the grates with warm, soapy

water or in a dishwasher. Use a
nonabrasive, plastic scrubbing pad
for cooked-on foods. Rinse and dry
weU.

4. Replace burners grates.

The removable cooktop

The surface burners

1. Remove surface burner grates.

2. Lift front of cooktop enough to clear

front of range. Grasp cool burner
openings. Lift and pull forward.

3. Wipe surface under cooktop with

sponge and warm, soapy water. Use
a soap-filled plastic scrubbing pad
on heavily soiled areas,

4. To replace cooktop, lower front of

cooktop while placing into rear
support brackets. Avoid hitting the
control panel.

A

warning

Personal Injury And Product

Damage Hazard

Do not try to clean under the

cooktop without removing the
cooktop first. The cooktop could
accidentally fall and injure you.

Do not drop the cooktop. Damage

can result to the finish and the
cooktop frame.

1. Remove the cooktop, following the

instructions above.

2. Wipe off surface burners with

warm, soapy water and a sp onge
after each use. To remove cooked-
on food, soak the burners in a
vinegar and water solution J or 20­

30 minutes. Scrub with a plastic
scrubbing pad.

3. If ports are clogged, clean v\ith

a

straight pin.

DO NOT enlarge or

distort the ports. DO NOT use a
toothpick to clean the ports.

Typical surface burner flame

4. Occasionally check the burner

flames for proper size and shape as
shown above. If flames lift off ports,
are yellow, or are noisy when
turned off, you may need to clean
the burners (see above), or tall a
qualified technician for adjustment.

5. Replace cooktop.

Page 7

Advertising
This manual is related to the following products: