Lift-up cooktop, Product damage hazard – Whirlpool 8SF302PSY User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CARING FOR YOUR RANGE
Lift-up cooktop
1- Remove surface burner grates.
2. Lift front of cooktop at both front corners
until the support rods lock into place.
AWARNING
Personal Injury Hazard
Be sure both support rods are fully
extended and in the locked position.
Failure to do so could result in per
sonal injury from the cooktop acciden
tally falling.
Product Damage Hazard
Do not drop the cooktop. Damage
could result to the porcelain and the
cooktop frame.
3. Wipe with warm, soapy water. Use a
soapy steel-wool pad on heavily soiled
areas.
NOTE: When cleaning under the cooktop
on standing pilot models, be careful not to
extinguish pilots.
4. To lower the cooktop, lift cooktop from
both sides while pressing the support
rods back to unlock them. Lower the
cooktop into place. Replace surface
burner grates.
18