Removing the oven bottom, Burn hazard, To remove – Whirlpool 8SF302PSY User Manual
Page 21: To replace
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CARING FOR YOUR RANGE
Removing the oven bottom
The panel in the oven bottom can be
removed for cleaning or to light the burner
pilot.
^WARNING
Burn Hazard
Make sure all parts are cool before
removing.
Failure to do so could result in burns.
To remove:
1
. Remove oven racks.
2
. Remove the two hold-down screws at the
rear of the oven. If screws are too tight to
remove by hand, use a screwdriver.
3
. Place fingers in slots in bottom panel and
lift rear of panel up and back until lip at
the front of panel is clear of front frame of
oven cavity.
4
. Lift bottom up and out.
To replace:
1
. Place oven bottom panel in oven with the
back raised about 6 inches or until you
can insert the hold-down lip at front of
panel under the front frame of oven
cavity.
2. Push back of oven bottom panel down
fully into place on metal flanges on rear
wall and insert the hold-down screws.
21