Timed drying cycle, Using damp dry, Using tumble press – Whirlpool LT7OOOXT User Manual

Page 15: Fluff air cycie, End-of-cycle signal, Gentle heat, Warning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TIMED DRYING cycle

Use the TIMED DRYING Cycle for any
load you want to dry by time.

• Turn the Cycle Control Knob to the

number of minutes you want.

• The last 8 minutes of this cycle

are without heat. This helps make
the load easier to handle.

Using DAMP DRY

Use this setting to dry damp items that
do not require an entire drying cycle, or

to dry items to damp level. (Two exam­
ples are heavy cottons, such as jeans,
which you do not want to become stiff,
or cotton clothes which are easier to

press when damp.)
1. Set the Cycle Control Knob on

DAMP DRY in the PERMANENT
PRESS Cycle.

2. Push the Start Button.

The dryer tumbles the load with heat

for 22 minutes, then without heat for
8 minutes.

Using TUMBLE PRESS®

The TUMBLE PRESS setting removes
wrinkles from clothing that has been
packed in a suitcase or closet, and from
items not removed from the dryer at the
end of a cycle.

The load will tumble in heated air for

12 minutes. The heat shuts off and the
dryer continues to tumble for 8 minutes.

For best results, put only a few items

at a time in this cycle. As soon as the
dryer stops, put items on hangers or
fold them.

FLUFF AIR cycie

^WARNING

Fire Hazard

Do not dry plastic or rubber items

with heat. Use AIR setting, or line
dry. Failure to do so could result
in fire or damaged items.

The dryer does not heat when the Cycle
Control Knob is set in FLUFF AIR. This
cycle can be used to fluff or air dry bed­
ding, plastic tablecloths, foam rubber
pillows, stuffed toys, sneakers, etc.
1. Turn the Cycle Control Knob to the

number of minutes you want in
FLUFF AIR.

2. Push the Start Button.

End-of-cycle signal

The dryer sounds a signal to let you
know when the cycle is finished. The
signal cannot be turned off and is

not adjustable.

The signal is helpful when you are

drying permanent press, synthetic and
other items that should be taken out
as soon as the dryer stops.

Gentle heat

The dryer automatically reduces the
heat during the last few minutes of each
drying cycle, before cool-down. This
helps prevent overdrying.

15

Advertising
This manual is related to the following products: