Whirlpool LT7OOOXT - Manual (Page 17)

Heat Inlet
duct
Electrical
supply
Clean lint gathered in screen area.
Periodically remove the dryer lint
screen and vacuum the opening. Use
the long, thin attachment (crevice tool)
on your vacuum cleaner.
^WARNING
Fire Hazard
Do not run the dryer with the lint
screen loose, damaged, blocked
or missing. Doing so can cause
overheating, damage and be a fire
hazard.
Clean lint gathered inside the dryer.
Lint can gather inside the dryer and
create a FIRE HAZARD. This lint
should be removed at least every
2 to 3 years, or more often,
depending on dryer usage.
A warning
Electrical Shock and
Personal Injury Hazard
• Unplug the power supply cord
or turn off the electrical power
before lint removal.
• Do not put hands inside the
cabinet.
• More than one person is
required to lift, tilt or move the
washer/dryer because of its
weight and size.
Failure to do so could result
in electrical shock, injury or
damage.
Cleaning should be done only by a
qualified person.
1. Unplug unit from electrical supply
or turn off electrical power.
2. Remove back panel from dryer.
3. Avoid touching wires and thermostats.
4. Remove lint from boxed-in area with
a soft brush or vacuum cleaner.
5. Replace back panel, reconnect and
level the Thin Twin.
17