Starting your washer, Position select a, Selector switch 2. load size – Whirlpool LT4905XM User Manual
Page 6: Select water 3. temperatures, Selector switch, Load size, Select water, Temperatures
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting your washer, be sure you have measured and added
detergent, and have put in a properly sorted load as recommended in
your "Laundry Guide”
Position
Select a
1
.
SELECTOR SWITCH
2
.
LOAD SIZE
>" \ ' /
ds
• Move Selector Switch to WASHER
position. Washer will not operate
when switch is in DRYER position.
Select WATER
3
.
TEMPERATURES
hot
warm
cold
cold
\
hot
№ If
cold
cold
• Match the wash water temperature
to the type of fabrics and soils being
washed.
Recommended
wash
temperatures
can be found in your "Laundry Guide"
6
• Turn the knob to point at a setting
that describes the size of load you
want to wash.
• The water level can be set tor EX
SMALL, MEDIUM or LARGE loads.
Select the water level that
matches the load size.
See your "Laundry Guide" tor detaiis
on load sizes.
LOAD SiZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can tear items.
LARGE
(11.9 gals
MEDIUM
(9 6 gals./36.3 L)
EX-SMALL /
(7 3 gals./27 7 LJ'
"Approximate (ill with load