Ermont, Safe use introduction before you start – Vermont Casting Vermont Ceiling C34G624M User Manual

Page 5

Advertising
background image

5

V

ermont

®

Circuit Breaker

(Trip breaker for the

circuit you will be

working on)

Fuse Box

(Remove fuse for the

circuit you will be

working on)

18"

84"

70"

Safe USe

IntrodUctIon

Before YoU Start

from bottom
edge of blade

to floor

from wall
to end of
blade

from wall to
center of fan

dimensions indicated are the minimum
allowable for proper installation.

CAuTIon: RISK oF ElECTRICAl SHoCK! Installation is to be in accordance with the national Electrical Code,

AnSI/nFPA 70-1999, and local codes. If you are unfamiliar with the wiring codes, you should use a qualified
electrician. To avoid overheating and possible damage to other equipment, do not install control to a receptacle,

fluorescent light fixture, motor-operated appliance, or transformer-supplied appliance.

• This fan is designed to be installed on an existing electrical outlet box. The outlet box must be Ul listed for

ceiling fan installations. If it is not, a new box must be installed.

This ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit. The

maximum current requirement for the fan with light fixture is 2.17 amps. The fan uses about .71 amp or 85 watts.
Maximum light current is about .83 amps or 100 watts of lighting.

Where wire nuts are employed, be sure all bare wires are within the connectors.
WARnInG: do not bend the blade brackets when installing the brackets, balancing the blades, or cleaning the

fan. do not insert foreign objects in between the rotating fan blades.

Unpacking

Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check them
against the parts listed in the Parts Guide. Before discarding packaging materials, be certain that all parts have
been removed.

For best performance and for your warranty to be valid,

use only genuine Casablanca blades, light fixtures, and accessories.

The blades in each pack are matched for equal weight

to assure smooth fan operation. If more than one fan
is being installed, be careful not to mix blades from
different cartons.

Inspect the contents of your carton for possible

shipping or handling damage. If parts are missing or
damaged, call 1-888-227-2178.

It is always a good idea to have an assistant to help

with the installation.

When cleaning, painting, or working near your fan,

be very careful of the fan and blades. Always turn the
power oFF to the ceiling fan before working on it or
replacing lightbulbs.

never insert anything into the path of the fan blades

while the fan is in operation.

• never install a fan over a pool or spa.
never operate a fan that has been damaged

i n a n y w a y. F o r a s s i s t a n c e i n o b t a i n i n g
service, call Casablanca Fan Company at
1-888-227-2178 or contact your local authorized
Casablanca dealer.

Advertising