Vermont Casting Vermont Ceiling C34G624M - Manual (Page 8)

8
MoTor iNsTAllATioN
2 black
Wires
2 White
Wires
3 Green
Wires
Motor
hook
Motor
hook
Ceiling
bracket
loops
Figure #1
Figure #2
Ceiling
bracket
loop
Step 2a. Attach one of the hooks on the outside of
the motor onto one of the loops hanging from the
ceiling bracket as shown in Figure #1.
Step 2b. Trim excess motor wires to six inches and
attach the fan wires to the ceiling bracket wiring
by placing the bare end of the wires side by side
and then securing with a wire nut. Test that the
connection is secure by pulling on the wire nut.
Connect in this order:
• GREEn leads from ceiling bracket and motor to
GRound conductor of power source. Secure
with wire nut as shown in Figure #2.
• WHITE wire from fan to white nEUTRAl wire
in ceiling bracket to the WHITE nEuTRAl
conductor wire from the power source. Secure
with wire nut as shown in Figure #2.
• BlACK wire from fan to BlACK wire in ceiling
bracket to the BlACK conductor wire from the
power source. Secure with wire nut as shown
in Figure #2.