If washer/dryer does not operate, When moving the washer/dryer, If yon need assistance – Whirlpool LTE5243DQ User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If washer/dryer does
not operate...
Check the following to be sure that:
1. Electrical supply is connected.
2. House fuse or circuit breaker is intact
and tight.
3. Washer lid or dryer door is closed.
4. Round shipping piece has been
completely removed.
5. Controls are set in a running or "ON"
position.
6. Dryer start button has been firmly
pushed.
When moving the
washer/dryer...
• Disconnect the power supply cord,
then tape securely to the
washer/dryer.
• Tape the drum to the front panel.
Tape the lint screen in place. Tape
the dryer door closed.
• Wedge a blanket between the
laundry tub ring and cabinet top to
restrict tub movement.
• Turn front leveling legs all the way in.
If yon need assistance...
Check your Use and Care Guide for a toll
free number to call, or call the dealer from
whom you purchased this appliance. The
dealer is listed in the Yellow Pages of your
phone directory under "Appliances —
Household — Major — Service and Repair."
When you call, you will need the
washer/dryer model number and serial
number. Both numbers can be found on
the model/serial rating plate located
behind the dryer door on the dryer door
well.
Part No. 3405970 Rev. B
©1998 Whirlpool Corporation
Benton Harbor, Michigan 49022
Printed in U.S.A.