GE 50246 GE Door Stop Alarm User Manual

Door stop alarm, User's manual, Easy to install

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

A

warning

Pressure Activated
Door Stop Alarm

Indoor Use Only

Great travel alarm -

hotel rooms, apartments

120dB alarm sounds when alarm is activated

On-off switch activates and deactivates alarm

Low-battery Indicator light

Risk of personal injury

• Prolonged exposure to

alarm siren may cause
permanent hearing loss

Switch

Low Battery

Indicator

Metal Contact

Plate ICoverl

BATTERY INSTALLATION

The door stop alarm requires one 9V battery. When the

Low-Battery Indicator illuminates, batteries need

replacing.

1. Toggle On/Off switch to the 'OFF' position to prevent

unintentional triggering.
2. Remove screw on the bottom of the door stop and
battery compartment cover.
3. Fit 9V battery to the connecting leaf, making sure the

terminal polarities are correct.
4. Replace cover.

IMPORTANT:

Remove batteries before storing the

AlaTiri fore^en^ed penods~Battenes coiTbde"over
time and may cause permanent damage to the unit.

Depleted batteries should be removed from the unit and

disposed of properly.

TESTING THE ALARM

1. Toggle the On/Off switch to 'ON'.

2. Quickly but firmly tap down and release the metal
on the cover unit. A quick siren chirp indicates proper
operation. NOTE: The palm of your hand can be used to
cover the alarm to reduce risk of hearing damage.

INSTALLATION:

Insert door wedge at the base of the

door as shown in the diagram, with the pointed edge
under the door gap. The alarm is properly installed if the
alarm sounds and the metal contact plate is depressed
when the door is opened. Make sure the non-skid pads
on the bottom of the alarm are in firm cantact with the
floor.

OPERATION

1. Toggle the On/Off switch to 'ON' to activate alarm.

2. Toggle the On/Off switch to 'OFF' to deactivate
alarm.

CARE AND MAINTENANCE

To clean the unit housing,

use a soft cloth slightly dampened with water and

wipe dry. Do not use chemical agents as this may
damage and discolor the unit.

90 DAY LIMITED WARRANTY:

Jasco

Products Company warrants this product to be free from
manufacturing defects for a period of ninety days from

the original date of consumer purchase. This warranty is

limited to the repair or replacement of this product only

and does not extend to consequential or incidental
damage to other products that may be used with this unit,
This warranty is in lieu af all other warranties express or

implied. Some states do not allow limitations on how long

an implied warranty lasts or permit the exclusion or

limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty
gives you specific rights, and you may also have other

rights which vary from state to state. If unit should prove

defective within the warranty period, return prepaid with
dated proof of purchase to;

Jasco Products Company
311 N.W. 122nd
Oklahoma City, OK. 73114

is 0 trademark of

General Electric Company
and is used under license to
Jasco Products Company LLC,
311 N.W. 122nd Street.
Oklahoma City, OK 73114
Or visit us at
www.jascoproducts.com

50246

-

2

/

52544-2

02

/

16/06

User's Manual

Instrucciones

Easy to Install

Door

Stop Alarm

Equipo Portátil de Seguridad
fácil de instalar

DO NOT USE IN WET LOCATIONS

NO EMPLEE ESTOS PRODUCTOS
EN LUGARES MOJADOS

Advertising