GE 2-9975 - Manual (Page 23)

R
emote
A
ccess
You can access your answering machine from any touch-tone phone
by entering a factory-set, three-digit security code (located on the bottom
of the unit) after you hear the outgoing announcement.
1. Dial the phone number for line 1 or 2.
2. After the beep following the outgoing announcement, enter the three-
digit security code (located on the bottom of the unit). Entering the
correct security code automatically turns on the answerer (even if it
was off).
3. Follow the voice-menu instructions to access your messages and
perform other functions. See the remote access card attached to the
cover for detailed information regarding the remote functions.
B
ypassing the
O
utgoing
A
nnouncement
You can bypass the outgoing announcement by pressing a number key
while the announcement is playing.
R
emote
A
ccess
V
oice
M
enu
This system has a voice menu system to guide you through the available
options when you access your answerer from a remote location.
This User's Guide also includes two wallet-size remote access reference
cards that you can remove and take with you.
R
emote
R
oom
M
onitor
One of the available remote functions is the room monitor feature which
activates the answerer's microphone so that you can hear what is going on
within the microphone's range.
• Press 2 to turn on room monitor (the microphone comes on for
one minute).
• Press 2 again to turn off the room monitor before the minute expires.
21