GE 2-9975 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7. Snap the base plate into place.
8. Feed the extra phone cord back
into the base plate.
9. Slip the mounting holes over the
wall plate posts and slide the unit
down firmly into place.
(Wall plate not included.)
CD
10. Rotate the handset hook one-half
turn (180“).
11. Plug the handset cord into the
handset and into the unit, and
then hang up the handset.
12. Set the TONE/PULSE switch
(located on the left side of the
unit) to TONE if you have touch-
tone service, or to PULSE if you
have rotary dial service.
13. Plug power supply adapter
into an AC outlet.
(It)
^.iT)
NOTE: Use only the Thomson 5-2380 power supply that came with
this unit. Using other adapters may damage the unit.