GE 2-9975 - Manual (Page 6)

D
esktop
I
nstallation
1. Connect the handset cord into the handset, and into the handset jack
on the left side of the base unit.
2. Set the TONE/PULSE switch to TONE if you have touch-tone service, or
to PULSE if you have rotary dial service.
3. Plug one end of the gray telephone line cord into the jack marked L1+2,
and plug the other end into an RJ14 type modular wall jack.
If you have a separate wall jack for each phone line, you also need to
plug the black phone cord into the L2 jack on the back of the unit and
into the wall jack.
4. Connect the power supply adapter to the POWER 11V AC jack on the
back of the unit, and plug it into an AC outlet.
NOTE: Use only the Thomson 5-2380 power supply that came with
this unit. Using other adapters may damage the unit.