Resume feature, Clock, Auto conversion – GE CSA1201RSS User Manual
Page 29: Display on/off, Beeper volume, Reminder, Other advantium features
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
other Advantium Features
Advantium Oven
Resume
feature
1. If your food needs to cook a bit longer,
you con restart the oven by pressing the
START/PAUSE pad or selector dial.
2. RESUME COOKING will be displayed and
the oven will restart immediately at 10%
of the original time.
The program stays in memory for 5 minutes.
After that you will need to begin the
program again.
Clock
The clock must be set before you can use
your oven for the first time. When setting the
clock time for the first time go directly to step
two.
1. To change the clock time, press the
SETTINGS pad and turn the dial to CLOCK
SETTINGS. Select SET TIME.
2. Turn the dial to set hours. Press the dial to
enter. Note: Setting hours sets AM/PM.
3. Turn the dial to set minutes. Press the dial
to enter.
Auto
Conversion
Auto conversion automatically reduces the
convection baking temperature. You still
input the recipe temperature and the oven
control does the rest.
To change the setting, press the SETTINGS
pad and turn the dial to AUTO CONVERSION.
Press the dial to enter. Turn the dial to
change the setting to CONVERSION ON or
CONVERSION OFF. Press the dial to enter.
Display
On/Off
Use this feature to turn your clock display on
or off.
Press the SETTINGS pad, turn the dial to
select DISPLAY ON/OFF. Turn the dial to
select CLOCK DISPLAY ON or CLOCK DISPLAY
OFF. Press the dial to enter.
Beeper
Volume
Use this feature to adjust the volume of the
beeper. You can even turn it off.
Press the SETTINGS pad, turn the dial to
select BEEPER VOLUME, press the dial to
enter. Select the beeper volume, press the
dial to enter.
Reminder
Use this feature to set an alarm beep to
sound at a specific time of day.
1. Press the SETTINGS pad, turn the dial to
select REMINDER and press the dial to enter.
2. Select SET REMINDER and press the dial to
enter.
3. Turn the dial to set the time hour and
minutes, press the dial to enter. NOTE:
Setting the hours set AM/PM.
To turn off the Reminder, press the SETTINGS
pad, turn the dial to select REMINDER and
press the dial to enter. Turn the dial to select
CLEAR REMINDER and press the dial to enter.
To check the Reminder time, press the
SETTINGS pad, turn the dial to select
REMINDER and press the dial to enter. Turn
the dial to select REVIEW REMINDER and
press the dial to enter. The display will show
the Reminder time.
29