For frozen roasts, Questions and answers, Roasting – GE JKP45WP User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Roasting

NOTE: Oven has controls for
upper oven and lower oven. Be
sure to set the correct control.
Pads on the left side of panel are
for the upper oven. Pads on the
right side of panel are for the
lower oven. The TIMER
ON/OFF, COOK TIME, and
STOP TIME pads can be used

for either oven.

Roasting is cooking

by dry heat.

Tender meat or poultry can be
roasted uncovered in your oven.
Roasting temperatures, which

should be low and steady, keep
spattering to a minimum. When

roasting, it is not necessary to

sear, baste, cover or add water to

your meat.

Roasting is really a baking

procedure used for meats.

Therefore, oven controls are set for

BAKE. (You may hear a slight

clicking sound, indicating the oven
is working properly.) Roasting is
easy; just follow these steps:

Step 1: Check weight of meat, and

place, fat-side-up, on roasting rack

in a shallow pan. (Broiler pan with

rack is a good pan for this.) Line
broiler pan with aluminum foil
when using pan for marinating,
cooking with fruits, cooking
heavily cured meats, or basting

food during cooking. Avoid

spilling these materials on oven

liner or door.

Step 2: Place in oven shelf in A or
B position. No preheating is
necessary.

Step 3:

Touch the BAKE pad

Step 4: Press the INCREASE or
DECREASE pad until desired

temperature is displayed.

The word “ON” will be displayed
as the oven heats up. When the
oven reaches the set temperature a
tone will sound.

To change oven temperature
during BAKE cycle, touch BAKE

pad and then INCREASE or
DECREASE pad to set new
temperature.

Step 5: Touch the CLEAR/OFF

pad when roasting is finished and

then remove food from oven.

Step 6: Most meats continue to
cook slightly while standing, after

being removed from the oven.

Standing time recommended for

roasts is 10 to 20 minutes. This
allows roasts to firm up and makes
them easier to carve. Internal
temperature will rise about 5°
to 10”F.; to compensate for
temperature increase, if desired,
remove the roast from oven sooner

(at 5° to 10”F. less than

temperature in the Roasting
Guide.)

NOTE: You may wish to TIME
BAKE, as described in the Baking

section, to turn oven on and off
automatically.

Remember that food will continue
to cook in the hot oven and
therefore should be removed when
the desired internal temperature
has been reached.

For Frozen Roasts

• Frozen roasts of beef, pork, lamb,
etc., can be started without
thawing, but allow 10 to 25

minutes per pound additional time
(10 minutes per pound for roasts

under 5 pounds, more time for

larger roasts).

• Thaw most frozen poultry before
roasting to ensure even doneness.

Some commercial frozen poultry

can be cooked successfully without
thawing. Follow directions given
on package label.

Questions and Answers

Q. Why is my roast crumbling

when I try to carve it?

A. Roasts are easier to slice if

allowed to cool 10 to 20 minutes
after removing from oven. Be sure

to cut across the grain of the meat.

Q. Do I need to preheat my oven
each time I cook a roast or
poultry?

A. It is unnecessary to preheat
your oven.

Q. When bnying a roast, are

there any special tips that would
help me cook it more evenly?

A. Yes. Buy a roast as even in
thickness as possible, or buy
rolled roasts.

Q. Can I seal the sides of my foil
“tent” when roasting a turkey?

A. Sealing the foil will steam
the meat. Leaving it unsealed

allows the air to circulate and
brown the meat.

12

Advertising
This manual is related to the following products: