GE JKP45WP - Manual (Page 6)

Features of Your Oven Control
UPPER OVEN
F D 0 1 0° ? O IO O’
\d u u ‘‘-I u u
JROIL PROBE CONV
DELAY TIMED BAKE
CLEAN LOCK Rffl
UU-ULI
CLEAN PROBE
imJ iMf
STOP ON TIMER '^'•EAN LOCK
COOK STOP
TIME TIME
NOTE: Oven has controls for
upper oven and lower oven. Be
sure to set the correct control.
Pads on the left side of panel are
for the upper oven. Pads on the
right side of panel are for the
lower oven. The TIMER
ON/OFF, COOK TIME, and
STOP TIME pads can be used
for either oven.
1. BAKE. Touch this pad to select
bake function. Then tap or press
INCREASE or DECREASE pad to
display desired temperature.
2. CLEAR/OFF. Touch this pad to
cancel all oven operations except
clock and timer.
3. FUNCTION INDICATORS.
Lights up to show whether bake,
timed bake, broil, self-clean or
probe is selected. Also lights up
to show oven door lock and oven
on status. Programmed information
can be displayed at any time by
touching the pad of the operation
you want to see. For example, you
can display the current time of day
while the timer is counting down
by touching the CLOCK pad.
Selected function is displayed on
the left side of panel for upper
oven and right side of panel for
lower oven.
4. TIME DISPLAY. Shows the
time of day, the times set for the
timer or automatic oven operation.
5. OVEN OR PROBE
TEMPERATURE AND BROIL
DISPLAY. Shows oven temperature,
probe temperature or broil setting.
Temperature is displayed on left
side of panel for upper oven and
right side of panel for lower oven.
6. INCREASE. Short taps to this
pad increase time or temperature
by small amounts. Press and hold
pad to increase time or temperature
by larger amounts.
7. BROIL. Touch this pad to select
broil function. Then tap
INCREASE pad to broil at HI
(525°F.) Tap DECREASE pad to
broil at LO (450°F.).
8. OVEN LIGHT. Touch to turn
oven light on or off
9. CLEAN. Touch this pad to
select self-cleaning function.
See Self-Cleaning Instructions
in this book.
10. DECREASE. Short taps
to this pad decrease time or
temperature by small amounts.
Press and hold pad to decrease
time or temperature by larger
amounts.
11. STOP TIME. Use this pad
along with COOK TIME or
CLEAN and INCREASE or
DECREASE pad to set the oven to
start automatically and stop
automatically at a time you select.
12. COOK TIME. Touch this pad
and then touch the INCREASE or
DECREASE pad to set the amount
of time you want your food to cook.
Touch BAKE and the INCREASE or
DECREASE pad to set the oven
temperature.
13. CLOCK. To set clock, first
touch CLOCK pad. “SET TIME”
will appear in the display. Tap
INCREASE or DECREASE pad to
change the time of day by small
amounts. Press and hold INCREASE
or DECREASE pad to change the
time of day by larger amounts.
14. TIMER ON/OFF. This pad
does not control oven operations.
The timer can time up to 9 hours
and 55 minutes.
To set timer, first touch TIMER
ON/OFF pad. “O :00,”“HR” and
“SET TIMER” will appear in the
display. Tap INCREASE or
DECREASE pad to change the
time by small amounts. Press and
hold INCREASE or DECREASE
pad to change the time by larger
amounts. Hours and minutes are
entered and displayed on the timer.
Timer signals when last minute is
reached. The timer will display
hours and minutes until the last
minute is displayed, then it will
display seconds. Timer signals
when it has counted down to 0.
Then it will signal every six
seconds until you touch TIMER
ON/OFF pad.
15. PROBE, (upper oven)
Insert the probe in your food and
receptacle, then roast to your
choice of internal food
temperatures.
If “F-” and a number flash
on display and the control
beeps, this indicates function
error code. Press CLEAR/OFF
pad. Allow oven to cool for one
hour. Put oven back into
operation. If function error
code repeats, disconnect power
to the oven and call for service.