About the control settings – GE DBSR453 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
About the control settings.
ge.com
IMPORTANT: Clean the lint filter each time you use the dryer.
Fabric Care/Temperature
(on some models)
REGULAR
For regular to heavy cottons,
or COTTONS
REG. HEAT
MEDIUM
For synthetics, blends, délicates and items labeled
permanent press.
or EASY CARE
MED. HEAT
DEUCATES
On some models. For délicates, synthetics and items labeled
tumble dry low.
LOW HEAT____________________________________________________________________________
FLUFF For
fluffing
items without heat. Use the
TIMED DRY
cycle.
NO HEAT
Automatic cycles automatically detemiine fabric diyness.
Select LESS DRY if you want your clothes
slightly damp at the end of the diying cycle. Select
MORE DRY if you want them to feel drier. Timed
cycles run for a selected time.
a>
I
§•
3
Drying Cycles
COTTONS
For cottons and most linens. For most loads, select
OPTIMUM DRY
[m
some models) or select the
Preferred Regular Setting marked with an *.
EASY CARE/
For wrinkle-free, permanent press and delicate items, and knits.
PERMANENT
PRESS
TIMED DRY
Set the Cycle Selector at the desired drying time.
DAMP DRY
For leaving items partially damp.
DEWRINKLE
For removing wrinkles from items that are clean and dry or that are very lightly damp.
QUICK
FLUFF For freshening or fluffing up already diy clothing, fabrics, linens and pillows. Use with
FLUFF NO HEAT
Provides 10 minutes of no heat tumbling.
Start
—Close the diyer door. Select
START. Opening the door during operation trill stop the dryer.
To restart the dryer, close the door and select
START to complete the cycle.
Color Logic
(on some models)
Select the correct
FABRIC CARE
setting.
Match the particular color below the words
trirh the same color on the Cycle Dial.
Example:
Drying a load of clothing labeled
permanent press.
0
Choose the
FABRIC CARE
setting—^ftrr
this load it would be the
EASY CARE
MED. HEAT
(which is a particular color).
Turn the Cycle Dial to the area, that has
the same coloi as the
FABRIC CARE
setting you have chosen—firr this load it
would be the
EASY CARE AUTOMATIC.
Q
§■
S
Q
Q
t
f
t/)
Q
•3
C/J
I
Co
I