Snooze alarm operation, Seconds time display, Brightness control – GE 1-Jul User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Snooze Alarm Operation

This operation allows e):tra sleep time­
after the alarm is on. The alarm will turn
off by pressing SNOOZE until the snooze
period is over. Snooze function can be
used repeatedly up to 2 hours. After this,

the alarm will turn off until the next alarm

conditions are met. Set the "quiet“ period
as follow:

1. Press and hold SNOOZE.

2. Press REV or FIND ta to set the

"quiet" period (the default time is 9 min­

utes) from 1 minute to 30 minutes. Re­
lease the button, then the “quiet" period
is set.

Seconds Time Display

The unit may display in seconds.

1. Press REV cXI or FWD [X3 to show sec­

onds display.

2. Release REV cX! or FWD Ka to return
to the hour and minute display

Brightness control

You can adjust th& backfight by adjusting

the BRIGHTNESS switch at the back of
the unit there are two modes you may
select from:

High — Stronger Backlight
Low —Weaker Backlight

Whdt your warranty covers:

• Defects in materials or workmanship.

For how long after your purchase;

• One year from date of purchase,

The warranty period for rentaf units begins with the first rental or 45 days from date of ^ipmenttothe
rental firm, whichever comes first.

What we will do:

• Provide you with a new, or at our option, a refurbished unit. The exchange unit is under warranty for

the rernainder of the original products warranty period,
• Proof of purchase in the form of a bi 11 of sa le o r recei pted invoice which is evidence that the product

is within the warranty period must be presented to obtain warranty service. For rental firms, proof of
first rental is also required.

Howto make a warranty cEaim:
• Properly pack your uirit. Include any cables, etc,, which were originally provided with the product.
We recommend using the original carton and packing rnateriaTs.

• Include evidence of purchase date such as the bill of sale. Also print your narne and address and a
description of the defect Send via standard DPS or Its equivatenl to:

Thomson Inc.

Product Exchange Certler
11721 B Alameda Avenue
Socorro, Texas 79927

• insure your shipment for of loss or damage. Thomson accepts no liability in case of damage or loss en
route to Thomson,
• Pay any charges billed to you by the Exchange Center for service not covered by the warranty.

• A newer refurbished unit will be shipped to you freight prepaid.

What your warranty does not cover:

• Customer instruction, {Your Owner's Manual provides information regarding operating Instructions
and user controls. For additional information, ask your dealer)
• Installation and setup service adjustments,

• Batteries.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Products purchased or serviced outside the USA.

• Acts of nature, such as but not limited to lightning damage.

Advertising