Canon VC-C50iR - Manual (Page 78)

40
Factory Default Settings
When the Product is shipped from the factory or when RESTORE DEFAULT has been set to
[YES] (
→ P.34), the settings are set to the default values shown below.
(Camera Default Settings)
Item Default Item Default
Focus * 1 Auto Preset None
Brightness * 1 Normal Clock and Text Not displayed
(Setting Screen Default Settings)
Item Setting
BAUD RATE 9600
STOP BIT 1
SET MENU
DATA 8 BIT Read only
NON PARITY Read only
REMOTE CONTROLLER ID 0
COMMAND VC-C4 MODE
DATE DISPLAY ON
TIME DISPLAY ON
TXT DISPLAY ON
DISPLAY MENU
SET DATE * 1 01.JAN.’00
SET TIME * 1 00:00:00 * 2
TIME STYLE * 1 24H * 3
DATE STYLE * 1 DD/MM/YY
Specified text * 1 None
PAN SPEED AUTO (10 for MANUAL)
TILT SPEED AUTO (10 for MANUAL)
MOVABLE RANGE DEFAULT
CAMERA MENU DIRECTION MIRROR OFF
NIGHT MODE * 1 OFF
AE REFERENCE DEFAULT (5 for MANUAL)
FLICKERLESS AE OFF
* 1) Settings marked with this symbol revert to the factory default values when the power is
switched off and then on again (
→ P.18). The values for all other settings are saved
when the power is turned off.
* 2) It will show “00:00:00AM” after RESTORE DEFAULT is executed.
* 3) It will show an AM/PM display after RESTORE DEFAULT is executed. (
→ P.28)