Kenmore 1250 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Section I
Page 14
The stitch width control regulates the width of the stitch you select. THE
HIGHER THE NUMBER, THE WIDER THE STITCH.
You may vary your zigzag stitch width by adjusting this control to the setting you
desire.
This control must be on the Red Dot in order to do straight stitching. Before
turning control, make sure needle is above fabric.
You will note a simulated buttonhole between the numbers 2 and 1 on the
control. This is the setting to be used when a buttonhole is sewn. The control
may have to be adjusted slightly in either direction depending on the weight of
the fabric being used.
Advertising