Straight stitching, Straight stitching , 3, Gahment constructfoim stitchesi – Kenmore 1250 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Page 2
GAHMENT CONSTRUCTfOIM STITCHESi
(Model 1250 only)
STRAIGHT STITCHING
SETTINGS:
Special Stitch Dial - ( M o d e l 1250 only.
Special Stitch Variegator- Red mark on top
(Model 1250)
Red dot to the
left(Model1240)
Stitch Width Control - Red Dot .
Stitch Length Control - 8 to 12
Straight Stitch Foot
Set your machine just as shown in the
illustration in order to straight stitch.
It is important that each dial have the
above setting. Before setting turn hand
wheel toward you, so that needle is
above fabric.
You will find in garment construction that you are doing two types of sewing-
temporary and permanent.
1. Temporary stitching-Usually the longest stitch possible and often done on a
single layer of fabric. The various types of temporary stitching are:
Basting
Stay stitching
Guide line marking