Tacking, Restart for the same size different size – Kenmore 200 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tacking
(T)
Stitch pattern:
(
2
)
Needie thread tension
(1)
Presser foot F:
® Pressure dial
24
3 t o 6
Satin stitch foot
3
f ®
Z24
i
m
Tacking is used to reinforce pockets, crotches and belt
carriers where extra strength is needed. Select pattern 24
and attach the satin foot F.
The machine will sew a tacking of 9/16" {1.5 cm) iength
automatically.
(T)
9/16" (1.5 cm)
Note:
Press the adjust key to manually change the stitch length
and stitch width.
To sew a shorter tack
When you sew a tack less than 9/16" (1.5 cm) in length,
sew to the required length (
2
) and press the reverse
button (1) and the machine will memorize the tack
length (4).
(
2
) Required length
(D
Reverse button
(4) Tack length
To sew the same size tack
To sew another tack in the same size, simply restart the
machine and it will stop automatically when finished
sewing. To sew the next tack at a different size, press the
Caned: key.
Restart for the Same Size
Different Size
-W Canceii
42