Ata pc card, Selecting the card designs – Kenmore 200 User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ATA PC Card
• To insert the ATA PC card
Insert the SanDisk® CompactFlash that contains saved
stitch data into the SanDisk® CompactFlash PC card
adapter. Then insert the adapter into the slot with the front
side of card (T) facing you.
Push the card until it elidís, then the eject button (2) pops
out.
(T) SanDisk® CompactFlash PC card
When the card is properly set, the red bar on the eject
button
(2)
will show up.
(D Eject button
d) Red bar
To eject the ATA PC card
Press the eject button (|) to eject the ATA PC card.
Take out the ATA PC card from the machine.
Notes:
• Use only Sandisk® CompactFlash128MB or smaller to
store stitch data.
• Use only Sandisk® CompactFlash PC card adapter.
Selecting the Card Designs
After inserting a card into your machine, you can view and
select its designs in the embroidery mode.
Press the key, then the embroidery mode key ® to
enter the embroidery mode.
(T) Embroidery mode key
(2) ATA PC card key
Press the ATA PC card key (2). The patterns in the card are
displayed in the first page.