Starting/canceling a function, Ultrabake™ baking/roasting, Press – Kenmore Sens-A-Clean 665.95829 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

STARTING/CANCELING A FUNCTION

START

After setting a function, you must press START/

ENTER to start the function. If you do not
press START/ENTER within 5 seconds of
setting, "START?” wiii show on the

display as a reminder. If you do not press

START/ENTER within 5 minutes of setting, the time
of day will appear. You must reset the function and
press START/ENTER.

OFF/CANCEL will cancel any function except the

Clock, Timer, or Oven or Cooktop Lockouts.
When you press OFF/CANCEL. the display
will show the time of day or, if the minute

timer is also being used, the time remaining.

Off

CANCEL

ULTRABAKE™ BAKING/ROASTING

Your oven is designed with the ULTRABAKE
enhanced baking system to constantly monitor
oven temperature. The bake and broil elements

will cycle, as needed, to maintain the desired

temperature. This feature is automatically activated

when the oven is in operation.

IMPORTANT: Never place food or cookware

directly on the oven door or the oven bottom.

1. Place the STURDIGLIDE™ rack(s) where you

need them in the oven. For more information, see
the “Positioning racks and pans” section, p. 12.

2.

Press BAKE.

PRESS

BAKE

3.

Set the temperature (optional).

Do this step if you want to set a temperature
other than 350°F. Press TEMP (▲) or

(T)

pad(s)

to raise or lower the temperature in 5®F amounts.

Use these pads until the desired temperature

shows on the small display.

PRESS

TEMP

A

YOU SEE

n r

C *

J J U

f

J ' J U

bak

:

YOU SEE

.....

»»I

f

J ' J U

BAKE

(example for bake at 375°F)

18

Advertising
This manual is related to the following products: