Kenmore 1430 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REVERSE STITCH CONTROL
It is best to begin and end seams with a
few stitches taken in reverse. This is
called back tacking. Back tacking
fastens the ends of the searns firmly and
prevents raveling.
^ j
When reverse stitching is needed, turn
the control clockyyise and hold there
gyring sevying. The fabric will imme
diately start feeding backwards and
seam will be fastened.
SPECIAL STITCH MODIFIER
This control gives you the means of
varying the stitches on the Special
Stitch Diak When the pointer is turned
to the Red Dot, the machine sews
forward only, vyhen the ppinter is
turned to the White Dot, the forward
designs are varied by the machine
sewing in a forward and reverse
manner. Carefully read directions given
In the next section 6f the book in order
to accomplish the various stitches
correctly.
BUTTONHOLE CONTROL
(Model 1625 only)
This contrbi is used in making button
holes. Detailed instructions are given in
the next section of the book.
1 '