Laccessories – Kenmore 1430 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
lACCESSORIES
NEEDLES
Use KEN MORE needles. The size of
the needle should conform with the
size of the thread and both should be
suitable to the fabric (See next page).
Never use a bent needle or one with a
blunt point.
Fig. 1. shows you the exact length of
your needle. Be sure you never use
one in your machine that is not this
exact length.
You will find among your accessories
"QNEBDLES’m With biue shanks. These
special needles are to be Msed when
sewing, certain knits and certain
difficult
synthetic
fabrics.
If
you
experience skipped stitches in any of
your sewing, use -
qneedle
". .
11 I
TTi
Fig. 1
PLACEMENT OF NEEDLE
Raise needle bar to Its highest position
by turning the hand wheel toward you.
Loosen the needle clamp screw. Hold
ing the needle with the flat side away
from-you, slip the needle into the
needle bar. Make certain it is up as
far as it can go. Tighten the needle
clamp screw with a screwdriver.
If you have a double needle for decora
tive stitching, it is inserted in the same
manner as the single needle.
21