Sewing preparation continued) – Kenmore 385.19365 User Manual
Page 79
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
{Sewing preparation continued)
H] After attaching the sensor buttonhole foot, raise the foot
once.
Insert corner of fabric under the foot.
Press the Up/dbwn needle position button twice.
Remove the fabric to the ieft to draw both threads under
the foot .
Insert the garment under the foot, and iower the needle
at the starting point*
Then lower the automatic buttonhole foot.
if there is a gap ®, it may cause an uneven buttonhole
stitch length as shown.
(D
Mark for placement of buttonhole
® Starting point
(D
Slider
(D
No gap
® Spring holder
0 Uneven stitch results
e Starting to sew
After sewing the buttonhole stitch, the machine stops
automatically.
Sewing steps:
[TjThe buttonhole will be automatically sewn first: the
front backtack and left row.
I Next, the right row.
I Last the back bartack and locking stitch.
Raise the presser foot.
To sew another buttonhole, press BH1 key, then
depress the foot control For buttonhole stitches
BH14, BH15, you can repeat sewing without
pressing keys* Raise the presser foot and lower the
foot again.